GRMS Control Panel
The room control panel is a one box solution, fully wired and ready for installation. There are different control panel solutions on offer, sizable to centralised, distributed or hybrid controls. Cabling topology for centralised control requires all field 230V and control cables to be wired into the panel. Distributed controls have a minimal amount of wires into the panel and require the least panel space, reducing cabling costs substantially. Further, contraction and expansion of the system may have little impact on the size of the distributed panel. Through the RON bus communication, the Local Control Unit (LCU) is connected to output devices such as relays, dimmers and PWM/0-10Vdc analogue outputs. The control panel with its configurable application software, is a smart control system, suitable for hotels, homes, apartments and other residential or commercial buildings. It can operate as a stand-alone system or as part of a network of control cabinets using TCP/ IP communication protocol.
The room control panel is assembled in an all metal enclosure made in accordance to BS7671:2008 standard, incorporating amendment 3:2015. It is designed and assembled for easy and accurate connections of field wires to it by a skilled installer. Each of the one panel solutions can easily be configured with a laptop or Android tablet by the installer, who can configure controller functionalities on site. This can eliminate visits from the manufacturer for commission or configuration purposes.
Features
Diverse range of control panels available with different combinations of relay outputs, Triac leading edge or MOSFET trailing dimmer and PWM/0-10Vdc controls, as per requirements
Centralised Control
Each control panels can be scaled to a larger system by linking multiple GRMS panels together or a making a custom made larger enclosure, supporting up to a maximum number of 92 channels per system
Scalable from a stand-alone systems to a large network, using TCP/IP communication link
Supports up to 24 switch plates of up to 4 buttons each, providing a maximum of 96 individual button control
Each button on each switch plate can be programmed to control one or many (as a group) of the 118 channels and outputs
Supports mobile devices through external wireless network
Supports 8 low level inputs and 4 low level outputs for devices such as PIR and door contacts
RON bus for interface to peripheral control and telemetry devices (wall switch plates, sensors, relays, mains dimmers and 0-10V dimming)
RON – Room Operating Network (proprietary communication link)
Local Control Unit (LCU)
The ‘Local Control Units’ are designed for smart control applications in both large and small buildings, such as hotels, commercial buildings, homes and apartments. The LCU316 operates as a stand-alone system, whilst the LCU316N is part of a network of controllers, using TCP/IP communications link. The LCU316N is supported by a comprehensive library of software modules for a broad range of applications, ranging from simple to more complex ‘tasks’. The customised LCU control software has been developed for more specialised control applications and to enable installers to configure controller functionalities on site. The LCU316N provides non-volatile storage of configuration data, which can be retrieved for the purpose of editing and reprogramming. For special cases in stand-alone applications, the LCU optionally provides non-volatile storage of events, time and date stamped using an on-board clock/calendar. Event information is available on demand.
Features
Integrated controller that can operate as a stand alone system or as part of a TCP/IP network.
RON bus communication to peripheral devices such as wall switch plates, relays, mains dimmers and 0-10V dimming.
Direct ‘low-level’ (5V logic) IO ports for local interface (control panel switches & indicators, PIR occupancy sensing, door switches, relays, etc.).
Support for up to 16 uniquely addressed switch plates of up to four buttons each for a total of 64 individual buttons.
System is scalable by adding RON devices and external IO ports.
Internal real time clock/calendar for control of lighting time schedules.
CE & FCC Compliant.
Software Features
Simple to use and configurable installer application software called HA2 which is configurable with a laptop.
Lighting control including soft light control with pre-sets and scenes.
Supports highly customized applications.
8 Relay Module
The Relay Module R850-08-10 is a RON device with 8 all-purpose relay outputs designed to work with the LCU316N controller for smart control applications in both small and large buildings, such as hotels, homes, apartments and commercial buildings. The module is used to switch power to field devices, suitable for lighting, curtains & blinds, fan motors for speed control, actuators, under floor heating, demisters, projectors and other items.
Features
All-purpose relays to meet most applications.
LED status indication for normal and fault operation for each channel for easy trouble shooting.
RON bus connection, multiple units can be connected to LCU316N.
RON – Room Operating Network (Systemteq proprietary communication link).
CE and FCC compliant.
2-Channel TRIAC Leading Edge Dimmer
The 2-Channel TRIAC Dimmer 712-600-2, is a RON device and leading edge 2-channel dimmer designed to work with the LCU316N controller for smart control applications in both large and small buildings, such as hotels, commercial building, homes and apartments.It supports both resistive and inductive loads and most LED lamps. Each channel can be independently dimmed either linearly or set scenes which are pre-defined dimming levels. It provides 32 levels of brightness providing a seamless flow when dimming up or down. With local selection of fade rates (ramping speeds) the dimming behaviour can be further enhanced.
Features
2 channels triac leading edge dimmer.
RON bus connection, can connect multiple units to LCU316N.
32 levels of brightness.
CE and FCC compliant.
2 channel MOSFET Trailing Edge Dimmer
The 2-Channel MOSFET Dimmer 712T-500-2, is a RON device and trailing edge 2-channel dimmer designed to work with the LCU316N controller for smart control applications in both large and small buildings, such as hotels, commercial building, homes and apartments. It supports resistive loads and most LED luminaires. Each channel can be independently dimmed either linearly or set scenes which are pre-defined dimming levels. It provides 32 levels of brightness providing a seamless flow when dimming up or down. With local selection of fade rates (ramping speeds) the dimming behaviour can be further enhanced.
Features
RON bus connection, can connect multiple units to LCU316N.
32 levels of brightness.
CE and FCC compliant.
4-Channel Digital to Analogue Converter (DAC)
The 4-channel DAC 713-DAC-4, is a RON device, an analogue output device with 4 channels each outputting 0-10Vdc. It is designed to work with the LCU316N controller for smart control applications in both large and small buildings, such as hotels, commercial buildings, home and apartments. The DAC module is suitable for dimming LED lights and any dimmable ballast requiring 0-10Vdc control, such as AV volume controls, actuators, DC fan motor controls and others.
Features
4 channels analogue output 0-10Vdc, each is independently controlled for:
Linear dimming or pre-sets with 256 levels of brightness to form scenes in soft light control.
AV volume control.
Actuators.
DC fan motors etc.
LED status indication for normal and fault operation for each channel for easy troubleshooting.
RON bus connection, multiple units can be connected to LCU316N.
RON – Room Operating Network (Systemteq proprietary communication link).
CE compliant.
PWM Controller
The Pulse Width Modulation module is a RON device,capable of operating in PWM mode or DAC mode. The device has 4 channels each outputting either 0-10Vdc or PWM signal. It is designed to work with the LCU316N controller for smart control applications in both large and small buildings, such as hotels, commercial buildings, homes and apartments. The PMW module is suitable for providing control signals to the drivers that dim LED lights.
Features
Linear dimming of brightness to form scenes in soft light control.
Light Intensity Control.
Voltage Regulation.
LED status indication for normal and fault operation to each channel for easy troubleshooting.
RON bus connection, multiple units can be connected to LCU316N.
RON – Room Operating Network (Systemteq’s proprietary communication link).
CE compliant.
Passive Infrared Occupancy Sensor (PIR)
The Systemteq’s PIRs 810-5m-9v and 810-10m-9v were specifically developed for the hospitality industry and are a component of Systemteq’s Integrated Hotel Management System (iHMS). The PIRs are multi-purpose and can be used for different applications such as room occupancy detection, energy management, light switching, HVAC control, curtains & blinds control, automated night light switching, access control and security. The PIR is unobtrusive with a small footprint of just 52.5mm diameter and protrudes from the ceiling by just 5.35mm (810-5m-9v) and 9.5mm (810-10m-9v). There are four different types of sensors which can be fitted into the same enclosure for different applications. The unit can rotate 360° and the sensor itself that can tilt up to 20° within the enclosure to optimise coverage of the room or area.
Features
Excellent resistance to electromagnetic noise.
High Signal/Noise ratio to minimise false operation.
Environmentally friendly, lead-free (Pb-free) element.
CE compliant.
Specification
Operating Voltage: 9V DC.
Enclosure colour: White.
Lens colour: Black or white.
Installation: 44~45mm ceiling hole.
Temperature Sensor
Systemteq’s temperature sensor is a RON device, a peripheral device connected to the LCU316 controller, measuring temperatures for HVAC control and building services. It is a digital sensor connected to the LCU controller on the RON network.
Each sensor is addressable with up to 4 sensors per LCU. Optionally the sensor can be attached directly to the HVAC plate instead of the RON. Applications that can benefit from this feature include HVAC controls, temperature monitoring systems inside buildings, equipment and process monitoring and control systems.
Features
All RON temperature sensors are fitted in a tube for ease of installation.
CE and FCC compliant.
