Mains Dimming
To control dimming of Mains (240v) circuits.
Can be either ceiling mount or Back box mounted
Mains Switching
To control switching of Mains (240v) circuits.
Can be either ceiling mount or Back box mounted.
For Non dimmable loads, relays or blind controls
Constant Current Dimming
To control dimming of Constant Current LED circuits.
Mainly used with LED down lights.
350mA > 1050mA options
Dali, 0-10v Interface
To control dimming or switching of other control protocols.
Constant Voltage Dimming
To control dimming of 12v, 24v or 36v circuits.
Mainly used with LED strip. Single colour or RGB, RGBW, CCT.
240v Mains Dimming Receivers
TEQ-SB9040A-S-EN
240v Trailing edge dimmer.
5w (Min) – 200w (Max LED) load
For use in ceiling applications.
Installation
Data
TEQ-SB9040A-S
240v Trailing edge dimmer.
5w (Min) – 200w (Max LED) load
For use in retro fit applications.
Installation
Data
TEQ-Mini Load
To be used if required load is below 5w
Preventing any flicker
Installation
Data
240v Mains Switching Receivers
TEQ-SB9100A-S-EN
240v relay. On-Off only
5w (Min) – 200w (Max LED) load
For use in ceiling applications.
For Non dimmable loads
Installation
Data
TEQ-SB9080A-S-EN
240v Blind Curtain control
Max load current: resistive loads: 4A capacitive/inductive loads: 2A
For use in ceiling applications.
Installation
Data
TEQ-SB9100A-S
240v relay. On-Off only
5w (Min) – 200w (Max LED) load
For retro fit applications.
For Non dimmable loads
Installation
Data
Constant Current Dimming Receivers
TEQ-SB9105-50CC250-1000
240v Input .
Switchable 250mA – 1050mA output
Installation
Data
Dali , 0-10v, interfaces
To interface with existing systems and control via Wireless Bluetooth Mesh
TEQ-SB2411
24V DC Input . (24v PSU required)
Will create its own Dali universe.
Address can be set for Broadcast or control of individual fixture or Dali group.
Installation
Data
TEQ-SB2421
240V DC Input .
Will create its own Dali or 0-10v universe or added to an existing universe.
Address can be set for Broadcast or control of individual fixture or Dali group.
Installation
Data
Constant Voltage Dimming Receivers
TEQ-SB9101CS
12V, 24v OR 36v Input . PSU required
1x 8a channel output. 12v,24v or 36v
Single colour control
Installation
Data
TEQ-SB1029-5C
12V, 24v OR 36v Input . PSU required
5x 4a channel output. 12v,24v or 36v
For single colour, RGB, RGBW + RGBCCT
Control.
Installation
Data