12558
page-template,page-template-full_width,page-template-full_width-php,page,page-id-12558,strata-core-1.1,strata-theme-ver-3.2,ajax_fade,page_not_loaded,wpb-js-composer js-comp-ver-6.10.0,vc_responsive

Light Switches & Panels, 1-12 Buttons

Systemteq understands that lighting control is more than just turning the lights on or off. Lighting control encompasses everything from basic energy savings to creating memorable lighting experiences. Systemteq’s lighting controls not only provide comfort, safety and convenience, their environmentally friendly lighting systems include energy saving modes which automatically turn lights off in unoccupied rooms.

 

Systemteq adapts and customises wall-mounted switch plates and panels to suit any interior and room design. All switch plates and panels are beautifully designed and skillfully manufactured. Switch plates usually have between one to four buttons and switch panels have more than four, and up to twelve buttons. Systemteq’s switches allow for on and off control of any type of load, such as standard lights, LED lights, halogens, fluorescents, electronic low voltage transformers and motors, for example ceiling fans. Programmable RGB LEDs give status feedback for lighting and other devices. Screw-less switch plates and panels provide a sleek finish which can be designed in different sizes and made from different materials such as stainless steel, aluminium, plastic, acrylic or safety glass. Finishes such as mat, gloss, satin, silk or engraving can be applied. Push buttons can be chosen in different colours and in round, oval, rectangular or square shapes.

 

Buttons are programmed to carry out different functions such as switching lights on or off, dimming control, selection of different scenes, curtains and blinds control and other service requests. The option of back light and status colour indications can be applied to each button. The button back light brightness is individually adjustable and can be completely switched off if required. Customised text and icons can be engraved in to each button if required.

Features

Standard switch plate size 86mm x 86mm

 

Standard switch panel size 86mm x 147mm

 

Bespoke plate and panel sizes can be manufactured upon request

 

Large variety of materials, finishes, colours, button shapes and sizes available

 

Each button can be programmed individually

 

Each button can be lit individually

 

Unique customisations of switch plates, panels and buttons possible

Heat, Ventilation & Air Conditioning Control
Panel (HVAC)

Systemteq’s integrated guest room control system (GRMS) provides full HVAC comfort control in auto mode. This is achieved through automatic changeover of heating or cooling, whereby a defined temperature can either be achieved or maintained. Mechanical systems supported are either heating or cooling or both, heating and cooling. The temperature and fan speed can be selected and adjusted on the wall mounted control panel.

Features

Standard HVAC plate size 86mm x 86mm

 

Bespoke plate sizes can be manufactured upon request

 

Variety of materials, finishes and colours available

 

Buttons to increase or decrease temperature and fan speeds

 

HVAC LCD display lights up on button activity and dims down ten seconds after last activity

 

One HVAC panel per fan coil unit, addressable to match RON temperature sensor address

 

Four fan speeds supported; Off, Low, Medium, High

 

Temperature set point selection, 1 degree up or down

 

Typically a temperature range between 19 – 28 degree Celsius can be set, however the temperature range can be adjusted as per individual requirement

 

Temperature displays can be manufactured in either Celsius or Fahrenheit

Media Control Switch

Systemteq’s dual channel audio volume control switch is connected to an audio amplifier output, in parallel with speakers. By turning the control knob, it varies the audio electrical output to the speaker therefore controlling the volume of the loud speaker(s). Typically used for vanity ceiling speaker installations, it controls the volume of the ceiling speaker independently.

Features

Standard media control switch plate size 86mm x 86mm

 

Bespoke plate sizes can be manufactured upon request

 

Single gang back box size required 75mm x 75mm x 47mm

 

Variety of materials, finishes and colours to chose from

 

Dual channels for two speaker connections

 

Suitable for 4/ 8 ohm speaker

 

Maximum 220 ohm of impedance to audio system

 

Maximum power input up to 100 Watts per connection

 

Maximum 30 db attenuation
Systemteq Qualified ETL Stamp