page-template,page-template-full_width,page-template-full_width-php,page,page-id-12558,theme-strata,strata-core-1.1,woocommerce-no-js,strata-theme-ver-3.2,ajax_fade,page_not_loaded,wpb-js-composer js-comp-ver-6.0.5,vc_responsive

Switch Plates & Wall Panels 1-12 Buttons

Systemteq’s understands that lighting control is more than just turning the lights on or off. Lighting control encompasses everything from basic energy savings to creating memorable guest experiences. Systemteq’s lighting controls not only provide comfort, safety and convenience, their environmentally friendly lighting systems include energy saving modes which automatically turn lights off in unoccupied rooms.


Systemteq adapts and customises wall-mounted switch plates and switch panels to suit any interior and room design. All switch plates and panels are beautifully designed and skilfully manufactured and can can be silk screened or engraved. Switch plates and panels can be designed as one or multiple buttons. The smaller switch plates usually have between one to four buttons, whilst the larger switch panels between one to eight and up twelve buttons, if required. Systemteq’s switches allow for on / off control of any type of load such as standard lights, LED lights, halogens, fluorescents, electronic low voltage transformers and motors such as ceiling fans. Programmable RGB LEDs give status feedback for lighting and other devices. Screw-less switch plates or panels provide a sleek finish and can be designed in different sizes and made from different materials such as stainless steel, aluminium, plastic, acrylic and safety glass, in gloss or satin colours with round or rectangular push buttons.


Buttons are programmed to carry out different functions such as switching lights on or off, dimming control, selection of different scenes, curtains and blinds control and guest service requests. The option of back light and status colour indications can be applied to each button. The button back light brightness is individually adjustable or can be completely switched off if required. Customised text and icons can be engraved in to the buttons for back lighting regardless of time of the day and light level.


Standard size of small panel 86mm x 86mm.


Standard size of large panel 86mm x 147mm.


Bespoke sizes can be manufactured.


Variety of panel and button colours, materials and sizes to chose from.


Each button can be programmed individually.


Each button can be lit individually.


Unique customizations of panels and buttons available.

Heat, Ventilation & Air Conditioning Control
Panel (HVAC)

Systemteq’s integrated guest room control system provides full HVAC comfort control in auto mode, such as automatic changeover of heating or cooling to achieve and maintain a set point. In general, mechanical systems supported are either heating or cooling or both, heating and cooling. Guests can select temperature and fan speed on the wall mounted control panel.


Buttons to increase or decrease temperature and fan speeds.


LCD display which dims down ten seconds after last switch activity.


One HVAC panel per fan coil unit, addressable to match RON temperature sensor address.


Four fan speeds supported Off, Low, Medium, High.


Temperature set point selection, 1 degree up/down.


Typically guests can select a temperature range between 19 – 28 degree Celsius which can be adjusted as per individual requirements.


Temperature displays can be manufactured in Celsius or Fahrenheit.

Super Media Volume Control Panel

Systemteq’s dual channel audio volume control panel MHE-CTL is connected to an audio amplifier output, in parallel with speakers. By turning the control knob, it varies the audio electrical output to the speaker therefore controlling the volume of the loud speaker(s). Typically used for vanity ceiling speaker installation, it controls the volume of the ceiling speaker independently.


Standard 86mm x 86mm size.


Single gang back box size required 75mm x 75mm x 47mm.


Variety of panel colours and materials to chose from.


Dual channels for two speaker connections.


Suitable for 4/ 8 ohm speaker.


Maximum 220 ohm of impedance to audio system.


Maximum power input up to 100 Watts per connection.


Maximum 30 db attenuation.